in Trades & Skills

Mamiya CDS Porrofinder Repair Tutorial

1k Views

Mamiya CDS Porrofinder Repair Tutorial

The Mamiya CDS Porrofinder is a vital component of the C330 and C220 twin lens reflex cameras, providing a clear and bright view of your subject. However, over time, this intricate viewfinder can experience issues that affect its performance. This tutorial will guide you through the process of repairing the Mamiya CDS Porrofinder, offering valuable insights for camera enthusiasts and repair technicians alike.

Understanding the Mamiya CDS Porrofinder

The Porrofinder consists of a series of prisms and mirrors that reflect light from the lens to your eye. It incorporates a CDS (Cadmium Sulfide) light meter, allowing you to accurately determine the correct exposure settings for your photographs. The Porrofinder is a delicate instrument, and it's essential to handle it with care during the repair process.

Tools and Materials

Before you begin the repair, gather the following tools and materials:

  • Phillips screwdriver set
  • Torx screwdriver set
  • Tweezers
  • Magnifying glass
  • Cleaning cloth
  • Isopropyl alcohol
  • Replacement parts (if needed)

Repair Procedure

1. Disassembly

  1. Remove the Porrofinder from the camera body by gently pulling it out. Be careful not to apply excessive force.
  2. Locate the screws holding the Porrofinder together. These screws are typically located on the sides or bottom of the viewfinder.
  3. Use a Phillips screwdriver to carefully remove the screws. Remember the order and location of each screw.
  4. Once the screws are removed, gently pry open the Porrofinder housing using a small flathead screwdriver or a plastic tool. Be careful not to damage the housing or the internal components.

2. Cleaning and Inspection

  1. Clean the interior of the Porrofinder using a soft cloth dampened with isopropyl alcohol. Pay attention to the mirrors and prisms, ensuring they are free of dust and debris.
  2. Inspect the mirrors for scratches or damage. If any damage is present, consider replacing the mirrors.
  3. Examine the CDS light meter for any signs of corrosion or malfunction. If the light meter is not working properly, it may need to be replaced.

3. Reassembly

  1. Carefully reassemble the Porrofinder, ensuring that all components are properly aligned. Refer to a repair manual or online resources for specific instructions.
  2. Replace the screws in the same order and location as they were removed. Tighten the screws securely but avoid overtightening.
  3. Test the Porrofinder by attaching it to the camera body. Ensure that the viewfinder is clear and that the CDS light meter is functioning correctly.

Troubleshooting

If the Porrofinder still has issues after repair, consider the following troubleshooting steps:

  • Check the electrical connections to the CDS light meter.
  • Verify that the mirrors are properly aligned and reflecting light correctly.
  • Inspect the prisms for any signs of damage or misalignment.
  • If the Porrofinder is still not working, it may require further diagnosis or replacement.

Conclusion

Repairing the Mamiya CDS Porrofinder can be a challenging but rewarding experience. By following this tutorial and taking your time, you can restore your viewfinder to its former glory. Remember to handle the Porrofinder with care and always consult a professional if you are unsure about any steps in the repair process.

For further assistance, you can refer to repair manuals, online forums, or contact a qualified camera repair technician.

CDS Light Meter