in Trades & Skills

Canon TLB/FTB Shutter Bounce Repair Guide

944 Views

Canon TLB/FTB Shutter Bounce Repair

This guide provides a step-by-step solution for repairing a common issue with Canon TLB and FTB cameras: shutter bounce. This problem occurs when the shutter braking mechanism malfunctions, causing the shutter to bounce or jam the wind mechanism.

The repair involves accessing and adjusting the brake pad, which is responsible for controlling the shutter’s movement. The following steps will help you troubleshoot and fix this issue:

Tools You’ll Need:

  • Small Phillips screwdriver
  • Tweezers
  • Magnifying glass (optional)
  • Clean cloth

Steps:

  1. **Remove the lens.** This will provide better access to the shutter mechanism.
  2. **Locate the shutter braking mechanism.** This is usually located on the top or side of the camera body. It will look like a small, metal lever with a pad attached to it.
  3. **Carefully remove the brake pad.** This can be done using tweezers. Be careful not to damage the pad or the surrounding components.
  4. **Clean the brake pad.** Use a clean cloth to remove any dirt or debris from the pad.
  5. **Check the brake pad for wear.** If the pad is worn or damaged, it will need to be replaced. You can find replacement brake pads online or at camera repair shops.
  6. **Reinstall the brake pad.** Make sure the pad is properly aligned and secured in place.
  7. **Test the shutter.** Take a few test shots to ensure the shutter is operating smoothly and without bouncing.

Troubleshooting Tips:

  • If the shutter is still bouncing, check the shutter speed dial. Make sure it is set to a slow shutter speed.
  • If the shutter is jammed, try gently tapping the camera body to dislodge the mechanism.
  • If you are still having trouble, it is best to consult a professional camera repair technician.

Important Notes:

  • This repair procedure should only be performed by experienced camera technicians.
  • Improper repair can damage your camera and void your warranty.
  • Always use caution when working with electronic devices.

By following these steps, you can repair a shutter bounce issue on your Canon TLB or FTB camera. Remember, if you are unsure about any part of the repair process, it is best to seek professional help.

DIY & Repair