DIY Foot Operated Hand Sanitizer Dispenser

In today's world, maintaining good hygiene is crucial, especially with the constant threat of germs and viruses. Hand sanitizers are a great way to keep your hands clean, but traditional dispensers require you to touch them, potentially spreading germs. A foot-operated hand sanitizer dispenser eliminates this problem, providing a hands-free and hygienic way to sanitize.

This guide will walk you through building your own foot-operated hand sanitizer dispenser using readily available materials and simple tools. This project is perfect for anyone interested in DIY solutions for hygiene and sanitation, and it's a great way to reduce the spread of germs in your home, office, or school.

Materials You Will Need:

• PVC pipe (1-inch diameter, 12 inches long)
• PVC elbow (1-inch diameter)
• PVC T-connector (1-inch diameter)
• PVC end cap (1-inch diameter)
• Compression spring (approximately 6 inches long)
• Hand sanitizer bottle (with a pump)
• PVC glue
• Scissors
• Measuring tape
• Drill with a 1/4-inch drill bit
• Saw (optional)

Instructions:

1. Cut the PVC pipe: Cut the PVC pipe to 10 inches long using a saw. If you don't have a saw, you can use a hacksaw or a pipe cutter.
2. Attach the elbow and end cap: Glue the PVC elbow to one end of the PVC pipe. Glue the PVC end cap to the other end of the PVC pipe.
3. Attach the T-connector: Glue the PVC T-connector to the elbow. Make sure the open end of the T-connector is facing up.
4. Drill a hole in the end cap: Drill a 1/4-inch hole in the center of the end cap. This hole will be used to insert the compression spring.
5. Attach the spring: Insert the compression spring into the hole in the end cap. Make sure the spring is securely in place.
6. Prepare the hand sanitizer bottle: Cut the top of the hand sanitizer bottle off, leaving just the pump. You may need to trim the pump to fit inside the T-connector.
7. Attach the hand sanitizer bottle: Place the hand sanitizer pump inside the T-connector. Make sure the pump is securely in place. You may need to use some glue to secure it.
8. Test the dispenser: Step on the end cap with the spring. The spring should compress and push the hand sanitizer pump, dispensing sanitizer.

Tips:

• Use PVC glue to create strong and leak-proof connections.
• Make sure the spring is the right size for your dispenser. A spring that is too weak will not push the pump effectively. A spring that is too strong will be difficult to compress.
• You can decorate your dispenser to make it more visually appealing. Use paint, stickers, or other materials to personalize it.

Conclusion:

Building a foot-operated hand sanitizer dispenser is a simple and effective way to improve hygiene and sanitation. This DIY project is easy to follow and uses readily available materials. By following these instructions, you can create a practical and hygienic dispenser that will help keep your hands clean and reduce the spread of germs.