How to Clean Your ScanNCut Mat and Regain the Tack

How to Clean Your ScanNCut Mat and Regain the Tack

Your ScanNCut mat is an essential part of your crafting process, providing a stable surface for your materials to adhere to while you cut. Over time, the mat's tackiness can diminish, leading to shifting materials and inaccurate cuts. Fortunately, cleaning your mat regularly can restore its stickiness and ensure precise cuts for years to come.

Why Clean Your ScanNCut Mat?

• Improved Adhesion: Cleaning removes dust, debris, and residue that can interfere with the mat's ability to hold materials securely.
• Precise Cutting: A clean mat ensures that your materials stay in place during cutting, resulting in clean and accurate cuts.
• Longer Lifespan: Regular cleaning extends the life of your ScanNCut mat by preventing the buildup of grime and wear and tear.

Cleaning Methods

There are several methods you can use to clean your ScanNCut mat. Choose the method that best suits your needs and the level of dirt or residue on your mat.

1. Sticky Roller Method

This method is quick and easy for removing loose debris and dust.

1. Use a sticky lint roller or a piece of adhesive tape to gently roll over the mat's surface, picking up any loose particles.
2. Repeat the process until no more debris is picked up.

2. Soap and Water Method

For a deeper clean, use soap and water to remove sticky residue and dirt.

1. Mix a mild dish soap with warm water.
2. Use a soft cloth or sponge to gently scrub the mat's surface, paying attention to areas with heavy residue.
3. Rinse the mat thoroughly with clean water.
4. Dry the mat completely with a clean cloth or towel.

3. Alcohol Cleaning Method

For stubborn residue or oily substances, you can use rubbing alcohol.

1. Apply a small amount of rubbing alcohol to a clean cloth.
2. Gently wipe the mat's surface, focusing on areas with stubborn residue.
3. Wipe the mat with a clean, dry cloth to remove any remaining alcohol.

Important Tips

• Avoid abrasive cleaners: Don't use harsh chemicals or abrasive cleaners as they can damage the mat's surface.
• Avoid immersing the mat in water: While you can use soap and water, don't fully submerge the mat as this can damage its adhesive properties.
• Allow the mat to dry completely: Ensure the mat is completely dry before using it again to prevent moisture from interfering with adhesion.

Restoring Tackiness

Once your mat is clean, you can restore its tackiness by using a sticky mat restorer or a simple trick with a sticky note.

1. Sticky Mat Restorer

Sticky mat restorers are specially formulated solutions designed to revitalize the adhesive properties of your ScanNCut mat. Follow the instructions on the product label for best results.

2. Sticky Note Trick

If you don't have a sticky mat restorer, you can use a sticky note to temporarily increase the mat's tackiness.

1. Place a sticky note on the mat's surface and press it firmly.
2. Carefully peel the sticky note off, leaving a slightly sticky residue on the mat.

Conclusion

Cleaning your ScanNCut mat is essential for maintaining its adhesive properties and ensuring precise cuts. By following these simple tips and cleaning methods, you can keep your mat in top condition and enjoy years of reliable cutting performance.