How to Recalibrate a Whirlpool Washer (Easy Steps)

If you're experiencing a locked-up Whirlpool washer or have recently replaced parts, you might need to recalibrate it. Recalibration is a simple process that can get your washer back in working order. This guide will walk you through the steps to recalibrate your Whirlpool washer.

Why Recalibrate a Whirlpool Washer?

Whirlpool washers, and other models made by Whirlpool, like Maytag, Amana, and Roper, have a built-in self-calibration system. This system helps ensure that the washer functions correctly by adjusting settings based on factors like water pressure and load size.

However, there are times when this system needs to be reset. This may happen after:

• A power outage
• Replacing parts, such as the control board or motor
• Moving the washer to a new location

Recalibrating your washer after any of these events can help prevent issues like:

• The washer not starting
• The washer filling with water but not spinning
• The washer draining but not filling

How to Recalibrate a Whirlpool Washer

Here's how to recalibrate your Whirlpool washer:

1. Unplug the washer from the power outlet.
2. Turn the dial to the rinse cycle. This will reset the control board.
3. Plug the washer back in.
4. Wait for the washer to complete the rinse cycle. This may take a few minutes.

Once the rinse cycle is complete, your washer should be recalibrated. You can now try running a regular wash cycle.

Troubleshooting Tips

If you're still having issues with your washer after recalibrating it, there are a few other things you can try:

• Check the water valves to make sure they are open and the water pressure is adequate.
• Check the drain hose to make sure it is not kinked or blocked.
• Check the power cord to make sure it is properly plugged in and the outlet is working.

If you've tried all of these troubleshooting tips and your washer is still not working, you may need to contact a qualified appliance technician.

Safety Precautions

• Always unplug the washer before working on it.
• Never touch the internal components of the washer while it is plugged in.
• If you are unsure about any part of the recalibration process, consult a qualified appliance technician.

Conclusion

Recalibrating your Whirlpool washer is a simple and effective way to resolve common issues. By following the steps outlined in this guide, you can get your washer back in working order quickly and easily. Remember to always prioritize safety by unplugging the washer before working on it. If you have any doubts, don't hesitate to seek professional assistance.